|Date Added:||10 June 2009|
|File Size:||48.63 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The GB drive was listed there. This post has been flagged and will be reviewed by our staff.
Proffitt Forum moderator April 19, 1: No, create an account now. Failure to do so will result in the inability to support USB 2. It found some thumb drives but not the gb SATA drive. I have installed a customised BIOS to overcome this limitation.
Set FSB at lowest setting, also with motherboard jumper. Use only one stick of memory, preferably one that has shown to work properly when the computer was working.
ASUS A7N8X-E Deluxe SATA issue
You have to understand that the CPU isn’t the only component using the memory bandwidth. My MB will see the.
Thx again Ps You dont need the audio turned on in the bios for it to work do you? Add your comment to this article You need to be a member to leave a comment. Track this discussion and email me when there are updates. I’d prefer to do a fresh install My 4 logical drives 1 physical and my DVD. When you start up you should see both drives, if only one is showing you have a problem, check leads and power.
The speaker is one of them small ones that seem to be taking over from the standard round metal types, do you think this could make a difference. I would like to get to the point where I can load windows onto the Sata drive and let it boot from that disk, then remove the ide drive completely. I have an asus a7n8x that still runs well but the hard drive is about to die. If you need assistance with this, let me know.
Asus A7N8X-E Deluxe SATA problem-no boot – TechRepublic
Let me know how things go. Everything looked good until I got to the portion on what drive to use and any partitions I wanted to make. Join the community hereit only takes a minute. Not at the Raid prompt Is your BIOS chip in a socket or soldered onto the board? All I had to do was put it all seluxe and it worked.
Here’s where the rub comes in: Sign up for freeit takes 30 seconds. Posted 26 September – Join thousands of tech enthusiasts and participate. If you’re still having problems, you might need a stronger PSU or you can try connecting your devices to an USB hub with its own power supply.
The strange thing is I have not touched it since I started this thread. Just as for the source rpm, you need to have your kernel sources installed for this technique to work. As you can see from the picture, there are only two connectors on a SATA data cable.
I would also need detailed delux on exactly what you are doing to go along with the pics. Edited by jpd, 22 September –